OEM GNSS

The single-frequency Trimble BD910 is a small GNSS receiver module that features centimeter-level, Real-Time Kinematic (RTK) positioning capabilities that are ideal for high-precision and control applications.

The Trimble BD930 supports both triple-frequency from the GPS and GLONASS constellations plus dual frequency from BeiDou and Galileo. Different configurations of the module are available. These include everything from an autonomous GPS L1 unit all the way to a four constellation triple-frequency RTK unit.

The Trimble BD920 is a small, dual frequency receiver enclosure that is capable of receiving a wide range of commercially available GNSS signals. It features centimeter-level, Real-Time Kinematic (RTK) positioning capabilities that are ideal for high-precision and control applications.

The Trimble BD920-W3G receiver module has been designed for applications requiring centimeter accuracy in a compact package. By integrating wireless communications on the same module the task of receiving and transmitting data such as RTK corrections is greatly simplified.

The Trimble BD930-UHF receiver module supports both triple-frequency from the GPS and GLONASS constellations, plus dual-frequency from BeiDou and Galileo. This compact board integrates the latest generation of UHF receiver modems allowing the system to instantly receive corrections from a large installed base of GNSS reference stations.

The Trimble BD935-INS receiver module features a high accuracy, triple-frequency GNSS receiver for precise position and an integrated MEMS inertial sensor package for 3D orientation to serve applications requiring position and attitude. The GNSS + Inertial combination delivers more stability and robustness than GNSS alone.

The Trimble UAS1 is a multi-constellation, dual-frequency receiver designed for UAV / UAS applications requiring centimeter accuracy in a very small package.

The Trimble MB-One receiver module features dual-antennas for heading and attitude applications. The MB-One has a powerful RTK engine that employs centimeter-level accuracy for systems using RTK against a static base. It also drives advanced RTK against an external moving base for relative positioning and network RTK using third-party network corrections.

The MB100 receiver module features low-power consumption in an extremely compact board design and a variety of output messages and data formats for extensive OEM solution interoperability. The MB100 works as a base, a rover and even a GNSS compass, and is available in various GNSS modes to adapt to customer needs.

The MB800 receiver module features a variety of output messages, data formats and advanced features for extensive OEM solution interoperability. The MB800 works as a base and as a rover and is available in various GNSS modes to adapt customer needs. It offers a unique blend of technologies which increases RTK availability and data integrity.

The BX935-INS receiver enclosure has been designed for applications requiring continuous centimeter accuracy in a compact rugged package. By integrating inertial sensors on the same module, robust high accuracy positions are produced in all environments. The Trimble BX935-INS supports both triple frequency for the GPS and GLONASS constellations plus dual frequency from BeiDou and Galileo.

The ABX series are state-of-the art GNSS sensors intended for general-purpose, real-time, high-accuracy, absolute positioning applications, with additionally accurate heading measurements and relative positioning for some of the available models. ABX receivers are smart GNSS receivers built around the GPS/GLONASS/SBAS, single- or dual-frequency MB100 or MB800 board.

The Ashtech ADU800 receiver enclosure, a 6D positioning system providing position + orientation. It a three antenna GNSS system employing “on-the-fly” integer ambiguity resolution techniques using carrier phase measurements from the three on board GNSS receivers to provide instantaneous 3D attitude information. 

The HDS800 is a powerful positioning solution that delivers state-of-the-art RTK + heading measurements in a rugged, highly integrated receiver design. Embedded Z-Blade GNSS centric technology uses all available GNSS signals equally, without any constellation preference, to deliver fast and stable RTK + heading solutions.

The BD982 comes with dual chips that support two antennas connected to the board. Independent observations from both antennas are passed to the processor where multi-constellation RTK baselines are computed.

The Trimble BD970 GNSS system is a compact multi-constellation receiver designed to deliver centimeter accuracy to a variety of applications.

The top of the range Zephyr^™ external GNSS antenna contains advanced technology for multipath reduction, outstanding low elevation satellite tracking, and sub-millimeter phase center stability. The Trimble Zephyr 2, Zephyr 2 Rugged and Zephyr 2 Geodetic antennas offer full support for current and near-future GNSS signals. Combined with its rugged durability, the Trimble Zephyr 2 antenna will be a long term investment.

The Trimble BX982 receiver enclosure is a multi-channel, multi-frequency OEM GNSS receiver which allows OEMs and system integrators to rapidly integrate centimeter-level positioning and precise heading into their application.

The ABX-Two is a robust GNSS receiver that delivers precise heading, pitch and roll along with full 3D attitude solutions with centimeter-level accuracy.

Trimble MB-Two is a powerful dual-frequency, lightweight GNSS receiver capable of providing centimeter-level accuracy, position and heading.

Ease of use, reliability and compatibility. Find your best option here.